Derrick Jensen
Garbage disposal is one of the essential things that everyone must have in their homes. It keeps a kitchen smelling fresh and prevents the growth of bacteria that could be harmful. Information on maintaining and taking good care of the garbage disposal will ensure it lasts for several years. The homeowners should all learn the good things about the best garbage disposal so they can appreciate its natural function. Here are the two good things that can be found in garbage disposals.
1. Easy Cleaning Method.
One of the good things it possesses is that it is straightforward and quick to clean, helping your kitchen stay free from awful odors and drain your sink correctly. Most garbage disposals are made from metal cylinders with rotating impellers. The new units have several grinders on the bottom or sides of the metal cylinder to grind down all the substances in the garbage disposal. In most cases, the disposal insides can be quickly covered with debris and sludge. Be sure to prevent hard items from falling into the drain.
Safety is paramount in cleaning out garbage disposal items. Before starting the cleaning project, be sure that the system or the fuse is turned off to ensure that there will be no chance of turning on the unit while you are cleaning it. Pliers or tongs are valuable in removing the non-disposable items stuck in the disposal. Also, avoid letting your hands inside the system, but if it becomes necessary, see that the unit is shut down.
To clean the grinding elements, you can use rock salt and ice. Combining a cup of salt and two cups of ice cubes is a good treatment for malodorous disposals. Put the ice cubes and rock salt over the ice, run cold water on it and turn on the system for about 5–10 seconds. If rock salt is unavailable, a cup of vinegar is an excellent alternative to knock the debris and sludge off the grinding elements, making it flow down the drain.
The best way to take care of your garbage disposal is to take out the drain line that goes to it regularly. You should also remove the line once the debris and sludge are removed to ensure that all the extricated items will go down the drain. This can be done by plugging the drain, filling the sink with water to a depth of about 2–4 inches, removing the drain plug, and turning on the system. All the collected water will be pulled to the line. Clearing the drain line after disposing of fibrous foods is needed as part of good maintenance, and this will assist in guaranteeing that the food particles will go down the drain.
2. Easy Installation.
Another good thing about the garbage disposal is that it is easy to install. Some people think working on this system is daunting, but if you have the right equipment and proper knowledge, this can be as simple as you think. Garbage disposals are the unsung heroes in the kitchen. This can contradict those who have not installed one, but once they utilize the garbage disposal, they will determine that it will be hard without it. This system swallows all the leftovers and other undesirable things inside the kitchen, and it does not groan or moan with whatever you put in it. To install the best garbage disposal, there must be a 120-volt outlet that is protected. Other things that might be needed include:
- Plumber putty
- Screwdrivers
- Putty knife
- Bucket and Rags
- Hammer
- Wire strippers
- Pipe wrench
- Wire nuts and electrical tape
Once you have all these, the initial thing to do is remove all the stuff under the sink to clear room for the operation. Then detach the filter together with the drain line connected to the sink. You can place the bucket below the sink and eliminate the waste lines. If the waste lines are taken away, also remove the mounting assembly. A large nut that secures the filter will be available, and it would be best if you detach it. Once you remove the filter, see to it that there is no pre-existing plumbers putty around the area. For sure, you would want a clean and friendly surface.
After doing this, you can begin opening the new garbage disposal and installing the system. You will need the mounting assembly and the sink flange. The mounting assembly has the lower and upper mounting bolts and rings. You can start opening the plumber putty and put a quarter inch of the coil of putty on the drain. Afterward, get the sink flange on the drain, and press down to the putty. Take the mounting ring and the gasket and give a push to the flange. The snap ring must be connected to the flange to keep the ring and gasket in position. The mounting bolts need to be tightened evenly, and then it is done. You can enjoy your new garbage disposal.
